GoodWe 25kW OnGrid Inverter

GoodWe 25kW OnGrid Inverter

The GoodWe 25 kW On‑Grid Inverter is built for high‑capacity solar systems — perfect for commercial roofs, large homes, or utility‑scale PV setups. It converts solar power directly to grid‑compatible AC electricity with high efficiency, and supports multiple MPPT inputs so you can connect large solar arrays or panels with different orientations. Its rugged, weather‑proof design and smart monitoring ensure reliable, low‑maintenance performance so you get maximum energy output for years without worry.

Full Specifications:

• Inverter Type: Three‑phase on‑grid (grid-tied) inverter

• Rated AC Output Power: 25 kW

• Maximum DC Input Power: ~ 32,500 W (or above depending on variant)

• Maximum DC Input Voltage: ~ 1,100 V

• MPPT Trackers: 3 independent MPPT inputs

• MPPT Voltage Operating Range: ~ 200–950 V (depending on panel configuration)

• Start-Up Voltage: ~ 180–250 V (depending on variant)

• Input Strings per MPPT: 2 strings per MPPT (for flexible array layout)

• Max Input Current per MPPT: ~ 25–30 A (varies by string)

• AC Output Voltage: 400 V (three‑phase, 3L/N/PE)

• Output Frequency: 50 / 60 Hz (auto-sensing)

• Peak Efficiency: ~ 98.6 % – 98.8 %

• AC Overload Capacity: ~ 27.5 kW or ~110% of nominal for limited time

• THD (Total Harmonic Distortion): < 3% — clean grid-quality power

• Cooling Method: Smart fan cooling

• Protection & Safety: Anti‑islanding, over‑voltage, over‑current, surge protection, insulation monitoring, DC/AC surge protection, optionally arc‑fault detection (depending on variant), etc.

• Ingress Protection / Enclosure Rating: IP65 or better — suitable for indoor or sheltered outdoor installation

• Operating Temperature Range: roughly –30 °C to +60 °C (depending on variant)

• Noise Level: Low noise operation (< ~45 dB in many variants)

• Communication / Monitoring: RS485, WiFi / LAN / optional 4G / optional remote monitoring through app/portal

• Suitable PV Oversizing: Often allows DC oversizing — letting you connect PV capacity greater than 1:1 with inverter capacity for better yield during low-light conditions.

• Recommended Use: Commercial, industrial, or large‑scale solar grid‑tie installations; rooftops or ground‑mount solar farms